Type of nut
Datetime:2018.04.27 From:HanDan HaoQiang Fastener Manufacturing Co.,Ltd
Hits:
Handan Haoqiang Fastener Manufacturing Co., Ltd. produces national standard nuts very popular, fine workmanship, good quality, good material selection. There are many types and specifications of the manufacturer. Main production: national standard nut, new national standard nut, British nut, American nut, high strength nut, nut, Mao Luomu, flange nut, loose nut, six angle bolt and so on. 1, ordinary outside six corners - the application is more extensive, the characteristic is that the fastening force is relatively large, the disadvantage is that there should be enough space in the installation, the wrench, the open wrench or the eyeglass wrench can be used when the installation is installed, and the spanner needs a lot of space. 2, the six corners inside the cylinder head are the most widely used in all screws, because it has a large fastening force and can be operated with six angle wrenches. It is convenient to install and is almost used in various structures. The appearance is beautiful and tidy. The shortcoming is that the fastening force is slightly lower than the outside six angles, and the repeated use is easy to damage the six corners of the inner corner. It can't be disassembled. 3, the six corners of the disc - little mechanical use, mechanical properties of the same, mostly used in furniture, the main role is to increase contact with wood materials and increase the appearance of the ornamental. 4. Headless inner hexagons - some structures must be used, such as threaded structures requiring great tightening force, or where cylindrical heads need to be hidden. 5. The six corners in the sunken head are mostly used in the power machinery, the main function is the same as the inner six corners. 6. Nylon lock nut - hexagonal inlaid nylon rubber ring to prevent loosening thread structure, strong power machinery used. 7. Flange nuts - mainly to increase the contact surface with the workpiece, mostly used in pipes, fasteners have been some stamping and casting. 8, the common six corners nuts are the most widely used and one of the most common fasteners. For more information, please continue to pay attention to website http://www.hqjgj.com of Handan Hao Qiang Fastener Manufacturing Co., Ltd.
|